TEKTRONIX:
Lots of good used Tektronix test equipment, very reasonably priced!
Before you buy, check the Ebay.com price statistics for usually-"untested, as-is" test equipment (covering Tek, HP, and General Radio auction prices), at the Ebay Test Equipment Price Survey
You can compare models and features at the following site, which has
Searchable Equipment Listings from Hundreds of Dealers
Questions? Want to ORDER? Want a Shipping/handling Quote and Payment-Method options? Email Tom at:
tomg@fullnet.com
If you want to ORDER and need a s/h quote and payment-method options, please be sure to include your shipping address, in your email.
NOTE: Many of the new arrivals are not yet tested. If you're interested in something,
just email, and it will be tested and inspected and a full report will
be emailed to you, as soon as possible.
This page has been reorganized! Click on a section name, below, to go to that section. Within sections, instruments are sorted by model-number.
Tektronix Sections:
Oscilloscopes, Curve Tracers, and Other Equipment:
Good working condition! Fully Tested. Includes two new probes. This scope is only about 2/3 the size of a standard shoebox. Could fit in a briefcase.
422 15 MHz 2-Channel Oscilloscope: only $109
Good working condition.
454 150 MHz Dual-Trace Oscilloscope: only $109!
Good condition. Needs a little work (fuzzy trace: bad CRT? or bad power supply cap or HV cap? or bad resistor in focus chain?). Could be an easy fix. If you want this in repaired condition for a higher price, let me know.
465 100 Mhz 2-Channel Oscilloscope: only $199 (Sold)
Good condition. Extensively tested. Works perfectly. Includes pouch.
465 Oscilloscope and DM44 Operator's Manual: $15
Original Tektronix manual. Excellent condition. Not a service manual.
464/466 Oscilloscopes Operator's Manual: $15
*Original* Tektronix manual. Excellent condition. Not a service manual.
465B Oscilloscope: $279
*Excellent* cosmetic condition. Currently undergoing minor repairs/refurbishment.
475 200 MHz 2-Channel Oscilloscope, with Option 4: $299
Clean and Fully Tested. Very good working and cosmetic condition. *Includes* front panel cover,
accessories pouch, AND full Ops/Service Manuals set on CD!
(Option 4 is: reduced electromagnetic interference, both radiated and conducted.)
475 Oscilloscope Operator's Manual: $15
*Original* Tektronix manual. Excellent condition. Not a service manual.
561B OSCILLOSCOPE, no plugins: $49
Military's yellow tag says: "Excellent condition. No longer needed by PMEL.".
575 Curve Tracer: $349
Good working condition.
576/577 Curve Tracer Test Fixtures:
013-0100-00 TO-3 test fixture: $49 (SOLD)
013-0111-00 Diode test fixture: $39
013-0099-02 FETs test fixture: $69
013-0124-02 ICs test fixture: $59
Good working condition.
Tektronix 630 14" Monitor: $49
Untested.
2215A 60 Mhz 2-Channel Portable Oscilloscope: only $249
Good working and cosmetic condition. A nice little light and very portable scope!
2235L 100 Mhz 2-Channel Portable Oscilloscope: $349
Excellent condition! Military model, with options that the regular 2235 scopes don't
have: CRT mesh filter and other reduced-emissions modifications, plus enhanced trigger
selection, LF- and HF-reject modes, "Uncal" lights for both channels and the timebase,
and a scale-illumination control. Serial number is B078258.
I measured the bandwidth of this 2235L and it was WELL-above the 100 MHz spec: 140 MHz
for Ch 1 and 150 MHz for Ch 2. Also, I was able to trigger on and obtain a stable
display of signals that were above 160 MHz, on both channels.
"The 2235 Dual Trace Oscilloscope offers many features found in many of the more
expensive oscilloscopes. Rugged design, light weight, and an easy-to-use front panel,
combined with characteristics like bandwidth to 100 MHz and Delayed Sweep makes this
a very versatile oscilloscope! Two input channels with vertical sensitivity from 2 mV
to 5 V/div with ±2% accuracy. Sweep speeds to 5 ns/div, 10:1 variable holdoff range,
advanced trigger system, trigger view, and large/bright CRT."
2235 100 Mhz 2-Channel Portable Oscilloscope: only $299 !!
Good working condition!
The 2235 Dual Trace Oscilloscope offers many features found in many of the more
expensive oscilloscopes. Rugged design, light weight, and an easy-to-use front panel,
combined with characteristics like bandwidth to 100 MHz and Delayed Sweep makes this
a very versatile oscilloscope! Two input channels with vertical sensitivity from 2 mV
to 5 V/div with ±2% accuracy. Sweep speeds to 5 ns/div, 10:1 variable holdoff range,
advanced trigger system, trigger view, and large, bright, sharp CRT.
2246 Mod A Oscilloscope, 100 MHz, 4-channel, dual timebase: $599
NICE! Has on-screen cursors for automatic time and voltage measurements.
*Excellent* cosmetic and working condition! Includes front panel cover.
2445 150 MHz 4-Channel Oscilloscope, AND Ops MANUAL: $499 (SOLD!)
*Excellent* cosmetic and working condition. Last calibrated 12/99.
4-channel portable analog oscilloscope. Cursor measurements of delta voltage & time.
Auto-setup of front panel, dual time base with delayed sweep and much more!
This Tek 2445 has a bright, crisp trace. Was only used at one site and not moved.
Includes accessories pouch. NOTE: This scope was mounted in a cabinet, and so it has
no carry-handle (but I might have one) and no rear cord-wrap feet. Wt: 22.4 lb.
2465A 350 MHz 4-channel Oscilloscope: $949
Good cosmetic and working condition. Passes all self-tests and self-cals. This is a truly-great scope. The 2465 scopes are considered by many to be the best portable analog oscilloscopes ever made.
7403 Oscilloscope Mainframe: *** only $89 ***
Good working condition. Holds up to three 7000-series plug-ins.
7504 100 MHz Oscilloscope Mainframe: *** only $119 ***
NICE! Works great. Looks great. Holds up to FOUR 7000-series plug-ins.
7504 Oscilloscope Service/Ops Manual (Original): $30
Good working condition. Holds up to three 7000-series plug-ins. And the 7603 has the largest screen of any scope I've seen. Note: photo may not be of the same 7603. INCLUDES SERVICE MANUAL on CD!
7603R (R7603) 100 Mhz Oscilloscope Mainframe, w/GPIB (IEEE-488) option: $89
Excellent cosmetic condition. Rackmountable. Three plug-in bays.
Needs a little work: unfocused near top and bottom of CRT,
intensity control has little effect, vertical deflection and positioning limited
to about CRT's height; probably an easy fix??
7603 100 MHz Military-Version Oscilloscope, Mil Model OS-245, WITH Plug-Ins and more: $199
Good working condition. Three plug-in bays. INCLUDES three plug-ins (two AM-6565/U single-channel vertical amps (like 7A15) and one TD-1085/U dual timebase (like the 7B53A)), a nice accessories/adapters kit, and the latch-on front-panel cover. Military condition code was "A1", so it may actually be unused! But there are scratches and dents, possibly from being pulled out for yearly recalibration. Includes Calibration Manual on CD. Military designations: AN/USM-281C and OS-245(P)/U.
7613 100 MHz STORAGE Oscilloscope Mainframe: $129
Three plug-in bays. Display storage. Good working condition.
7704 200 MHz Oscilloscope Mainframe: $159
Good working condition. Four plug-in bays.
7844 400 MHz DUAL-BEAM Oscilloscope Mainframe: $199
Excellent working condition. Four plug-in bays.
R7844 400 MHz Dual-Beam Oscilloscope mainframe, rackmountable, for parts: $79 ea
NON-working parts units. Several available. Appear to be complete. (One with no power supply: $69)
R7903 500 MHz rackmountable Oscilloscope Mainframe: $169
Gorgeous! Tested: Works GREAT! Three plug-in bays. Bench or rackmountable.
Currently undergoing minor repair/refurbishment.
7904 500 MHz Oscilloscope Mainframe: $179
Good working condition. Four plug-in bays.
7904A 500 MHz Oscilloscope Mainframe: $189
Good working condition. Four plug-in bays. Improved 7904 design.
T922 15 MHz 2-channel Oscilloscope: *** ONLY $119 *** !!
Good cosmetic and working condition! Nice clean, small, light portable scope.
Case style is the same as the single-channel T912, which is pictured on this page.
Excellent working condition! Tested. Passes self-tests. Panel perfect. Just a few very minor paint scrapes on case. Almost like new. Includes many manuals. Compatible probes: Tek P6138A and others.
7000-Series Plug-Ins:
067-0587-02 Calibration Plug-In: $199
Used to calibrate gain, risetime, and frequency response of Tek 7000-series mainframe scopes.
7A13 Differential Comparator: $89
Good working condition. Has digital electronic readout. Common Mode Rejection Ratio of 10,000. 1 Meg Zin. 1mV-5V sensitivity.
7A13 Differential Comparator: $69
Good working condition. Has mechanical digital readout. Common Mode Rejection Ratio of 10,000. 1 Meg Zin. 1mV-5V sensitivity.
7A15A 80 MHz vertical amplifier: $29
7A16A 150 MHz vertical amplifier: $34
Fully tested. Good working condition. Several available. (Note: photo may not be of same 7A18.) Some units may be available with special options.
Tested. Working. Good Condition. Several available. (Note: photo may not be of same 7A18A.)
7A19 600 MHz Vertical Amplifier: $79
Good working condition. 10 mV-1V sensitivity. 50 Ohms Zin.
7A22 Differential Vertical Amplifier: $59
Good working condition. Have several.
Fully tested. Good working condition. Several available. (Note: photo may not be of same 7A26.)
Good working condition. To 5ns/div. Several available. (Note: photo may not be of same 7B53A.)
Good working condition. Several available. (Note: photo may not be of same unit sold.)
Good working condition.
UNUSED?!! Has a mil-surplus condition-code of A4 !! Excellent condition!
Triggering to 400MHz, 1nS to 5S/div, Variable trigger holdoff,
Peak to peak auto triggering. Delayed triggering.
Tested. Working. Excellent Condition. Triggering to 400MHz.
1nS to 5S/div. Variable trigger holdoff. Peak to peak auto triggering. Several available.
UNUSED?! Has a mil-surplus condition-code of A4 !! Excellent condition!
Triggering to 400MHz, 1nS to 5S/div, Variable trigger holdoff, Peak to peak auto
triggering, Single channel, Delta Time Measurements with CRT Readout, Delay Time
Measurements with CRT Readout, Vertical Trace Separation between Two Delayed Sweeps.
Tested. Working. Excellent condition. Triggering to 400MHz.
1nS to 5S/div. Variable trigger holdoff. Peak to peak auto triggering.
Single channel Delta Time Measurements with CRT Readout. Delay Time
Measurements with CRT Readout. Vertical Trace Separation between Two
Delayed Sweeps. Several available.
7B92 500 MHz Dual Delayed/Delaying Time Base: $79
Good working condition. Fastest time/div is 0.5 nanosecond!
The 7B92 has triggering to 500MHz, and alternate display of
Intensified Delaying and Delayed Sweeps.
7D02 Logic Analyzer: $129
Excellent Condition. Working: Passes all self-tests.
"Personality Module" is not included.
7D11 Digital Delay Plug-In: $54
7D13 Multimeter: $59
Tested. Works. Good condition.
7D15 225 MHz Universal Counter/Timer: $89
Good working condition!
Tested. Good working and cosmetic condition. Passes all self-tests.
7L14 Spectrum Analyzer: ONLY $1,499! (SOLD!)
Excellent working condition! Probably unused. 10 kHz to 1.8 GHz. For 7000-series scope mainframes.
UNUSED??! Has mil-surplus condition-code of A4 !!
Excellent condition. INCLUDES the S-1 Sampling Head.
A photocopy of the ops/service manual is also available.
The 7S12 TDR/Sampler Plug-in has vertical
scales calibrated in mp (reflection coefficient 0.001) and mV
from 2 to 500 units/div in 8 steps. The unit has a tape dial of
4900 ft, 490 ft, 49 ft (air dielectric); 3200 ft, 320 ft, 32 ft
(polyethylene dielectric); and 10, 1, and 0.1 µs (time).
The unit also provides time/division settings of 20 ps to 1 µs in
1-2-5 sequence. Pulse-generator head not included.
S-1 DC-1 GHz Sampling Head: $29
Good working condition. For 7S12 and other sampling plug-ins. Several available.
S-2 DC-4.6 GHz Sampling Head: $69
Good working condition. Risetime <= 75 picosecond (pS). Fits 7S12 and other sampling plug-ins.
S-52 Pulse Generator Head: $119
Good working condition. For 7S12 and other sampling plug-ins.
S-53 Trigger Recognizer Head: $109
Good working condition. For 7S12 and other sampling plug-ins. Several available.
500-Series Plug-Ins and Mainframes:
DC503 Universal Counter: $99
Good working condition.
DM501 Multimeter: $49
Good working condition. Three available.
DM5010 Digital Multimeter: $159
(Currently undergoing minor repair.)
DM501A Multimeter: $99
DP501 Digital (Frequency) Prescaler (UNUSED!): $139 (SOLD)
Unused! Excellent working condition. Only ONE left...
FG503 Function Generator: $119
Excellent working and cosmetic condition. 0.1 to 3 MHz in 6 ranges,
sine/square/triangle with or w/o DC Offset, 30 V p-p max out,
VCF IN, TRIG OUT.
MR501 X-Y Monitor: $249
Working condition. Good bright CRT with sharp focus (and no double peaking or screen burn).
Has a couple of cracked/missing small bezel/trim pieces.
PG501 50 MHz Pulse Generator: $69
Good working condition. Several available. The PG501 Pulse
Generator Plug-In is designed for use in the TM500-Series Mainframes and
provides from 5Hz to 50MHz repetition rate. Features simultaneous positive
and negative outputs, a wide range of pulse-period durations and duty
factors, trigger output, and external trigger/duration input. Provides
0.5 to 5 V output into 50-ohms. Its performance and ease of operation
make it well-suited for digital and analog applications.
PG506 Calibration Generator: $349
Good working condition.
PG508 50 MHz Pulse generator: $139
Good working condition.
PS501-2 Plugin, Power Supply, 0-20V, .4 A, metered: $89 (Sold)
Good condition. Tested. Working.
PS503A Power Supply: $119
Good condition. Tested. Working.
SG502 Signal Generator: $99
SG503 250 MHz Leveled-Sine Generator: $299
Used for calibration of oscilloscopes and other instruments. 50 KHz, and 250 KHz to 250 MHz.
5 mv to 5.5 v p-p. Built-in digital frequency counter. Calibrated multi-turn voltage dial.
Sticker say "Navy Metcal Program - Calibration Standard".
SG504 1050 MHz Leveled-Sine Generator: $449
Used for calibration of oscilloscopes and other instruments.
50 KHz or 6 MHz Ref, and 245 MHz to 1050 MHz, to 5 v p-p. FM Input +/- 10 V max.
No cables included.
SG505 Ultra-Low-Distortion Oscillator: $449
*Excellent* working and cosmetic condition. Almost like new. Recent calibration sticker date.
10 Hz to 100 kHz in 4 ranges. THD of 0.0003% typical from 20 Hz to 20 kHz.
-60 dBm to +10 dBm output (600 Ohms) in 8 ranges. Sync Out. Gnd/Floating switch.
TG501 Time-Mark Generator: $199
Good working condition! Used to test and calibrate oscilloscopes' time/div.
TM501 1-bay Portable Power-Supply Mainframe: $49
Excellent operational and cosmetic condition. Several available.
TM503 3-bay Portable Power-Supply Mainframe: $69
Excellent operational and cosmetic condition. INCLUDES a copy of the TM503 Ops/Service Manual on CD. Several available.
TM504 4-bay Portable Power-Supply Mainframe: $89
Good working condition. Only one left.
Excellent operational and cosmetic condition! Almost like new!
Probes and Probe Accessories:
Tek Scope Probe Ground Lead: $4 ea
5 inches long. Tek part number 175-0124-00 (or -01?). Several dozen available.
P6007 100X oscilloscope probe, BRAND NEW(!): $79
BRAND NEW! 6 feet, 100X, 2.2pF, 10M Ohm. With all accessories and manual.
P6008 10X oscilloscope probe, WITH ACCESSORIES: only $39! (SOLD)
10 Megohms, 7 pF (picoFarads), 70-inch lead, with 013-0071-00 screw-on
grabber probe tip, H.F. spring-loaded tip and gnd, ground wire and clip,
hook tip, flex tip
P6011 1X oscilloscope probe: $29
P6046 Probe Amplifier and Power Supply: $69
Includes amplifier and power supply, only.
P6105 95 MHz 10X 3-meter Probe: $39
Good working condition. 10x, 15.5 pF, 10 Meg ohm, 3 meters long. Compensation range: 15 pF to 47 pF.
P6106 200 MHz 10X 3-meter Probe: $49
Good working condition. 10x, 10 Meg ohm, 3 meters long.
P6106 250 MHz 10X Probe: $59
Good working condition. 10x, 13 pF, 10 Meg ohm, 2 meters long.
P6108 100 MHz 10X Probe: $39
Good working condition. 10x, 2 meters long.
P6106A 250 MHz Probe "Ends" Set, NEW IN SEALED TEK PACKAGE: only $19!
Each package has both ends (probe and BNC/compensator box), but ** NO CABLE **.
P6106A specs: 250 MHz, 10X, 11.2 pF, 10 Megohms. Several sets available. All NEW/UNUSED, in sealed Tek packages (except for one or two that I opened just to look at them).
P6109B Probe, UNUSED: $99
Unused P6109B 100 MHz 10X passive probe! For use with oscilloscopes with
bandwidths of 100 MHz to 115 MHz and input impedances of 1 MegOhm.
Specifications (when used with a 100-115 MHz instrument with 1 Mohm input impedance):
Attenuation (system): 10X +/- 1.3% at DC
Input Resistance (system): 10 Megohms +/- 1.3%
Input Capacitance: 11.8 pF to 14.8 pF (13.3 pF nominal)
Compensation Range: 15 pF to 35 pF
System Bandwidth (-3 dB): DC to 100 MHz
Maximum Working Input Voltage: 300 V, CAT II
P6111B 200 MHz 10X Probe, with manual: $69
Good working condition. 10x, 14.1 pF, 10 MegOhms, 2 meters long. Compensation range: 15 pF to 35 pF. Includes manual on CD.
P6111B 200 MHz 10X Probe, BRAND NEW(!): $99
BRAND NEW, in sealed package. 10x, 14.1 pF, 10 MegOhms, 2 meters long. Compensation range: 15 pF to 35 pF. Includes all accessories and manual.
P6130 250 MHz 10X Probe: $69 (SOLD OUT!)
Good working condition. 10X, 10M Ohm, 12.7pF, 1.5 Meter. Several available.
P6131 300 MHz 10X Probe, with manual on CD: $79
Good working condition. Compensation range: 14 pF to 18 pF. Bandwidth: >=300 MHz on a 2465 or 7A42; >=150 MHz on a 2445.
P6136 350 MHz 10X Probe, with manual on CD: $89
Good working condition. 10 MOHM, 10.8 pF, 10X, 1.3 Meter cable. Compensation range: 12 pF to 18 pF.
P6137 400 MHz 10X Probe, with manual on CD: $139
Good working condition. 10 MOHM, 10.8 pF, 10X, 1.5 Meter cable. Compensation range: 12 pF to 18 pF.
P6201 900 MHz FET Probe (UNUSED?): $349
Looks unused! Includes case and accessories, and manual on CD. Serial number B064955.
Risetime < 389 pS! 1X, 10X, 100X. 50 Ohm or 1 Megohm (ext).
P6202 FET Probe: $199
Includes case, power supply, probe, and ground lead and clip.
P6460 Data Acquisition Probe (NEW IN PACKAGE!!): only $179 (SOLD!)
The P6460 Data Acquisition probe is designed to be used with the Tektronix 1240/1241
logic analyzers. The probe is "new in the package" and comes with instructions.
NON-Tektronix Probes:
Oldaker 3502 Oscilloscope Probe: $40 ea
100 MHz, 1X/10X switchable (which is nice), 57pF/12pF,
10 Megohms/1 Megohm, 2 meter cable. BRAND NEW. Complete kit with all accessories. Works with almost all Tek scopes.
Philips PM8926/09 Oscilloscope Probe: $35
100 MHz, 10X, 12 pF, 10 Megohms, 1.5 meter cable. Works with almost all Tek scopes. Excellent condition.
Parts and Miscellaneous Stuff:
Tektronix J-FETS (New/unused), Tek p/n 151-1042-02: $4 ea
Tektronix RED KNOB: $4 ea
Tek p/n 366-1031-00. New/Unused. Several available.
3A6 Oscilloscope Plug-In, non-working: $20
Untested. Has one cracked/broken rotary switch contact/wafer assembly. Otherwise complete.
432, 5L4N, 7D15, 5A14N: ** 2-push-button, DPDT switches ** (new/unused): $4 ea
Tektronix part number 260-1227-00. Six available. New/Unused. For 432, 5L4N, 7D15 and 5A14N.
R5103N Oscilloscope with Plug-Ins: $ *** MAKE OFFER ***
INCLUDES: 5B10N, 5A22N, and 5A18N plug-ins! Tested. Works great. Three plug-in bays. Rackmountable.
5103N/D10 2 MHz STORAGE Oscilloscope Mainframe: $79
Tested. Works great. The 5103N/D10 Oscilloscope is a single beam,
split-screen storage mainframe and D10 CRT Display Unit with a
6.5", 8 x 10 division (0.5 in/div) display area with internal graticule.
Features include separate upper and lower store modes, internal
graticule, beam finder, current/voltage/time calibrator, and DC coupled
Z-axis input. SN B089360.
5103N/D15 2 MHz Oscilloscope Mainframe: $79
Good working condition.
5A15N PLUG-IN, VERTICAL AMP: $29
The 5A15N Single-Channel Amplifier Plug-In is for use in the
5000-Series Oscilloscope Mainframes. Provides bandwidth of DC to 2MHz
at sensitivities to 1 mV/div. Two 5A15Ns may be used in a
mainframe to provide dual-channel operation, or to provide
1 mV/div X-Y operation if one is inserted in
the right plug-in compartment.
5A18N DUAL VERTICAL AMPLIFIER PLUG-IN: $34
5B10N PLUG-IN, TIMEBASE/AMPLIFIER: $29
Designed for use in the 5000-Series Mainframes. Provides
sweep speeds from 100 ns/div to 5 s/divisions.
Sensitivities of 50 mV/div & 500 mV/div.
5B12N PLUG-IN, DUAL DELAYING TIMEBASE: $34
7000-series Mainframes' ** Cord-Wrap Feet ** (new/unused): $5 ea
Tektronix p/n: 348-0190-00. For 7000-series oscilloscope mainframes.
7000-series Mainframes' ** Cord-Wrap Feet ** (new/unused): $5 ea
Tektronix p/n: 348-0191-00. For 7000-series oscilloscope mainframes. Also refer to Tektronix part # 129-0146-00.
7A18 Plug-In's ** Dual 5K Pots, mated back-to-back ** (new/unused): $8 ea
Tektronix part number: 311-1131-00. Five available.
7A22 Plug-In's ** Matched Capacitor Set ** (new in Tek package): $10
Tek part number: 295-0117-00. Only ONE set available.
CA Oscilloscope Plug-In: $20
Untested. Missing some tubes. Otherwise complete and in good condition.
TDA1675 Scope's ** Vertical Deflection IC's ** (new/unused): $8 ea
Only TWO available.
This page is at http://www.fullnet.com/u/tomg/tek.htm.
